ND Graffiti Protect™ Application Instructions:

Full ND Graffiti Protect Technique™ Instructions Are Right here

The substrate needs to be very first primed with A person COAT™ Water Primarily based Primer/Sealer/End in adequate amount so that it’s visible and might be felt about the surface. Immediately after it’s dry into the touch implement ND GRAFFITI Protect™ by spray (airless sprayer with 0.015 or 0.013 tip at about 300-500 PSI is suggested for some huge painted and all porous surfaces; small strain hand pump sprayer at about 35 PSI can be employed on pretty porous surfaces). The application must be slender and ND GRAFFITI SHIELD™ need to appear water obvious when used. THE GRAFFITI Protect Method™ is a total of 4 individual coats of ND GRAFFITI Protect™ over the base application of ONE COAT™. Each individual coat should be dry for the touch ahead of future coat is used. Drying time may differ among couple of minutes to an hour or so based upon the climate, humidity and ventilation. Graffiti Shield

THE GRAFFITI SHIELD Program™ must be utilised immediately after ninety six hrs that’s the heal time. You can secure the wall though it is actually curing by masking it by using a drop cloth or securing the region. Really should cleansing be required just before 96 several hours, reapply ND GRAFFITI Defend™ towards the needed spots only. Will not let this solution to freeze and do not utilize it in freezing temperatures. Nonetheless, as soon as it is utilized and cured, freeze/thaw cycles can have no impact on suitable item performance. No Slip Floor Coat

Clear away new graffiti from your GRAFFITI Protect Technique™ in 24 several hours or considerably less for much better success. Use our DISAPPEAR Organic and natural Graffiti/Adhesive Remover™ – apply to place and allow it to soak on graffiti for 5 minutes to about quarter-hour and flush with water, clear with a comfortable fabric, or powerwash the realm. When important, touch up cleaned regions with a lightweight coat of ND GRAFFITI SHIELD™. Graffiti Remover

Remember to test this solution on a little inconspicuous area just before continuing with the task.

About the author